 |
 |
| XB808'11 Alu Chassis CNC Machined (3mm) |
 |
| Part number: # 351104 |
 |
| Released: Feb. 17, 2011 |
|
|
|
 |
| |
|
Stock status:
|
(click to enlarge) |
| CNC-machined chassis for XB808â™11 made from high-quality Swiss 3mm 7075 T6 aluminum, strategically machined in low-stress areas to make it as light as possible without affecting strength or rigidity. Hardcoated at XRAYâ™s own in-house fully robotic hardcoating line, ensuring a perfect hardcoated surface every time. |
|
Non-essential material below the engine, fuel tank, and diffs was removed to allow for the lightest weight and lowest possible center of gravity and to ensure required and necessary chassis flex. The downstop setscrew area has been greatly reinforced, and all screw holes on the bottom of the chassis are countersunk for a smooth chassis underside with no protruding screw heads.
The completely-redesigned chassis provides a solid foundation. All-new weight distribution was integrated into the car design, with centralized placement of internal parts for improved side-to-side weight balance.
The new chassis gives increased stability and improved handling in all different racing conditions. The redistributed weight balance ensures improved jumping and handling through bumpy sections. The refined stability makes the car easier to drive. |
| Note: |
| Swiss 7075 T6 is extremely rigid aluminum material and after the hardcoating process in rare cases some small cracks may occur â“ for example, around openings or on edges where tension in the material is highest. Those small cracks are a natural effect and have no negative impact on the performance, reliability, or lifespan of the product and as such are not considered to be a defect. |
|
| Due the nature of the aluminum material and the machining process, it is normal that the chassis may be slightly bent in the longitudinal direction. |
|
|
|
|
